Jaké jsou vlastnosti a vlastnosti jednofázového střídavého univerzálního motoru?
1.Vlastnosti jednofázových střídavých univerzálních motorů
výhody:
1) lze použít pro AC i DC;
2) Vysoká rychlost, obecně 400035000 RPM/Min;
3) Pohodlná regulace rychlosti (regulace napětí a rychlosti) a rychlost nemá nic společného s frekvencí napájení;
4) Startovací moment je velký, 47násobek jmenovitého momentu;
5) Mechanické vlastnosti jsou měkké a kapacita přetížení je silná;
6) Účinnost je obecně 30 procent 70 procent;
7) Malá velikost a nízká hmotnost;
Nevýhody:
opotřebení uhlíkových kartáčů a komutátoru, vratné jiskry, elektromagnetické rušení atd.
2. Pro jednofázový střídavý sériový motor má 4 charakteristiky při stabilním napětí a frekvenci
1)The relationship between current and torque: I=f(T), which is similar to a parabolic characteristic. If don't consider the influence of magnetic circuit saturation, T∝I2;
2)The relationship between current and speed: I=f(n), which is similar to a hyperbolic characteristic. When the power supply voltage is constant and the effect of magnetic circuit saturation is not considered, n∝(1/I);
3)Vztah mezi rychlostí a točivým momentem: n=f(T). Tato charakteristická křivka je měkká charakteristika;
4)The relationship between power factor and torque: COS(ф)=f(T), it is a straight line close to the level. The power factor of this type of motor is high, above 0.9, and the high-speed motor can be above 0.95;
In addition, the no-load speed of a single-phase series motor is theoretically infinite, so the no-load speed is very high. Therefore, the mechanical strength of the motor is usually taken into consideration, and no-load operation is not allowed for fear of "speeding." But in fact, due to the friction of the bearing, the pressure and friction of the brush, the wind friction of the armature and the demand for ventilation and heat dissipation, the armature is equipped with fan blades, which is equivalent to adding a small load to the motor, so the actual no-load speed is not It may be infinite. But the no-load speed is still relatively high, generally 1.5 to 3 times the rated speed, or even higher.